一、基本情况

博士，教授，博士/硕士研究生导师。主要研究方向为铝合金、钛合金等轻质材料3d打印成形、塑性加工工艺以及微观结构研究等。作为负责人主持“国家自然科学基金”面上、青年、重点课题，“湖南省自然科学基金”优青、联合项目，市产学研合作专项、企业合作开发等科研项目10余项。获中国有色科技进步一等奖、国防科技进步三等奖、湖南省教学成果二等奖、全国煤炭行业协会教学成果一等奖等奖励5项。在International Journal of Plasticity、Journal of Materials Science and Technology、International Journal of Fatigue等国际权威学术刊物发表学术论文60余篇，授权国家发明专利30余项，指导学生参加科技竞赛获“国家级奖”4项，在读研究生连续获得国家奖学金。

E-mail：federer.song@163.com

二、学习工作经历

2025/10－至今，湖南科技大学，3044am永利集团官网，教授

2022/01－2025/10，湖南科技大学，3044am永利集团官网，副教授

2018/01－2021/12，湖南科技大学，3044am永利集团官网，讲师

2014/09－2017/12，中南大学，3044am永利集团官网，博士

三、主要研究方向

铝合金、钛合金等轻质材料3d打印成形、塑性加工工艺、微观结构研究

四、研究项目：

[1] 作为负责人主持“国家自然科学基金面上项目”（52375332）

[2] 作为负责人主持“国家自然科学基金重点项目课题”（U21A20130）

[3] 作为负责人主持“国家自然科学基金青年基金项目”（52005177）

[4] 作为负责人主持“湖南省科技厅优青项目”（2024JJ4020）

[5] 作为负责人主持“湖南省重点研发计划项目子项”（2022GK2043）

[6] 作为负责人主持“湖南省自然科学基金项目”（2019JJ60043）

[7] 作为负责人主持“湖南省教育厅基金项目”（20C0767）

[8] 作为负责人主持“教育部实验室开放基金”（EESD1803）

[9] 作为负责人主持“湘潭市产学研专项”（CXY-YB20181007）

[10] 作为负责人主持“企业合作专项”（D122C0）

[11] 作为负责人主持“企业合作专项”（D122T0）

[12] 作为负责人主持“企业合作专项”（D123DJ）

[13] 作为负责人主持“企业合作专项”（D518A6）

[14] 作为主要研究人员参与“国家自然科学基金区域联合基金重点项目” (U1637210)

[15] 作为主要研究人员参与“国家发改委项目” (20121743)

[16] 作为主要研究人员参与“广东省教育部产学研结合重大专项” (2012A090300008)

[17] 作为主要研究人员参与“国家重大专项XXXX工程项目”

五、科研成果

代表论文

[1] Enhancing the strength and plasticity of laminated aluminum alloy by introducing micron-scale pure aluminum interlayers. International Journal of Plasticity, 2026

[2] Achieving isotropic deformation and enhanced compressive properties in laminated aluminum alloys through micron-scale pure aluminum interlayers. Journal of Materials Science and Technology, 2026

[3] Microstructure stability promoting extensive tuning of remanence temperature coefficient in Gd-doped 2:17-type SmCo magnets. Journal of Materials Science and Technology, 2026

[4] Corrosion fatigue mechanisms and control technologies in aviation aluminum alloys: A critical review. Chinese Journal of Aeronautics, 2026

[5] A novel cobweb-like sub-grain structured Al-Cu-Mg alloy with high strength-plasticity synergy. International Journal of Plasticity, 2025

[6] Improving wear resistance of TA15 alloy by double reinforced network structure. Tribology International, 2025

[7] Improving the high-temperature tensile properties of titanium alloys by elemental enrichment at grain boundaries. Materials Characterization, 2025

[8] A strategy to synergistically enhance the interfacial bonding quality and strength-ductility of laminated aluminum alloy. Journal of Materials Research and Technology, 2025

[9] Enhanced tribological performance of laser directed energy deposited Ti5Si3/Ti3Al composite coatings through ultra-fine network structure. Journal of Materials Research and Technology, 2025

[10] Unveiling the high ductility-strength mechanism induced by honeycomb dislocations and dispersed vacancies in 7A52- DCI4 aluminum alloy. Journal of Materials Science and Technology, 2025

[11] The study of twins and static recrystallization behavior based on torsion deformed 〈001〉 − oriented aluminum single crystals. Materials Characterization, 2024

[12] Effects of recrystallization and element diffusion behavior on interfacial bonding quality and mechanical properties of aluminum laminated composites. Journal of Alloys and Compounds, 2024.

[13] Effect of thermal-cold cycling treatment on microstructural stability of Al-Cu-Mg alloy hemispherical component. Journal of Alloys and Compounds, 2023.

[14] Effect of temperature field on microstructural stability of Al-Cu-Mg alloy hemispherical component. Journal of Materials Research and Technology, 2023.

[15] Effect of large pre-deformation on microstructure and mechanical properties of 7B52 laminated aluminum alloy. Journal of Alloys and Compounds, 2023.

[16] Influence of pre-deformation on microstructure and mechanical properties along thickness direction of 2519A Al alloy thick plate. Materials Today Communications, 2023.

[17] Macro–Micro–Nonuniform Deformation Behavior of 7B52 Laminated Aluminum Alloy under High-Speed Impact. Journal of Materials Engineering and Performance, 2023.

[18] Effects of initial orientation on microstructure evolution of aluminum single crystals during hot deformation. Materials Science and Engineering: A, 2023.

[19] Investigation on fatigue crack propagation behaviors in the thickness direction of 2519A aluminum alloy thick plate. International Journal of Fatigue, 2022.

[20] Microstructure evolution and reaction mechanism of continuously compositionally Ti/Al intermetallic graded material fabricated by laser powder deposition. Journal of Materials Research and Technology, 2022.

[21] The coupling influences and corresponding mechanisms of high efficiency thermal-magnetic treatments on the dimensional stability of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2022.

[22] Optimization of Parameters in Laser Powder Bed Fusion TA15 Titanium Alloy Using Taguchi Method. Crystals, 2022.

[23] Microstructural Evolution and Mechanical Behavior of TA15 Titanium Alloy Fabricated by Selective Laser Melting: Influence of Solution Treatment and Aging. Metals, 2023.

[24] Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting. Crystals, 2022.

[25] A review of additive manufacturing techniques and post-processing for high-temperature titanium alloys. Metals, 2023.

[26] Effect of temperature and strain rate on deformation mode and crack behavior of 7B52 laminated aluminum alloy under impact loading. Metals and Materials International, 2021.

[27] Texture evolution and control of 2524 aluminum alloy and its effect on fatigue crack propagation behavior. Applied Sciences, 2021.

[28] Effect of Microstructure on Mechanical Properties of 2519A Aluminum Alloy in Thickness Direction. Metals, 2022.

[29] A new type of anti-phase boundaries in the T (Al20Cu2Mn3) phase and the pre-deformation effect on T phase precipitation. Intermetallics, 2020.

[30] The effect of Ni plating on the residual stress and micro-yield strength in an Al-Cu-Mg alloy under different diffusion treatments. JOM, 2019.

[31] Microstructural evolution and dimensional stability of TiC-reinforced steel matrix composite during tempering. Materials Letters, 2020.

[32] Effect of annealing temperatures on microstructural stability and mechanical properties of Ti–Zr–Nb alloy. Journal of Materials Research and Technology, 2023.

[33] Effects of service environment and pre-deformation on the fatigue be haviour of 2524 aluminum alloy. Archives of Civil and Mechanical Engineering, 2020.

[34] The fatigue crack behavior of 7N01-T6 aluminum alloy in different particle environments. Archives of Civil and Mechanical Engineering, 2020.

[35] Acceleration effect of a graphite dust environment on the fatigue crack propagation rates of Al alloy. International Journal of Fatigue, 2019.

[36] The fatigue crack growth behavior of 2524‐T3 aluminum alloy in an Al₂O₃ particle environment. Fatigue & Fracture of Engineering Materials & Structures, 2020.

[37] The effect of SiC addition on the dimensional stability of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2018.

[38] The effect of stress-aging on dimensional stability behavior of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2017.

[39] Effects of two-stage aging on the dimensional stability of Al-Cu-Mg alloy. Journal of Alloys and Compounds, 2017.

[40] Fabrication, Microstructure and Shear Properties of Al Foam Sandwich. Materials and Manufacturing Processes, 2016.

[41] Preparation of WC/Co composite powders by electroless plating. Ceramics International, 2017.

[42] Microstructure and mechanical properties of columnar-grained copper produced by the Ohno continuous casting technique, Materials Science and Engineering A, 2015.

[43] LaB6对TA15钛合金高温性能稳定性的影响. 中国有色金属学报, 2026

[44] 深冷辅助超声滚压对2519A铝合金表面完整性及疲劳性能的影响. 中国有色金属学报, 2025

[45] 深冷处理对7A62铝合金微观组织和力学性能的影响. 中国有色金属学报, 2024

[46] 7A62铝合金在热磁时效后的析出行为与力学性能. 中国有色金属学报, 2023

[47] 激光增材制造网状结构金属基复合材料的研究进展. 中国有色金属学报, 2023

[48] 在线淬火对7A62铝合金的显微组织与力学性能的影响. 中国有色金属学报, 2023

[49] 铝合金挤压铸造扭转复合成形模具-工件界面换热行为. 中国有色金属学报, 2022

[50] 换向轧制对铜晶粒尺寸高温热稳定性的影响. 材料导报, 2022

[51] 7475铝合金中η相沿E/Al相界的非均匀析出机理. 稀有金属材料与工程, 2022

[52] 中等应变速率轧制制备多尺度混晶镁合金工艺及组织性能. 中国有色金属学报, 2022

[53] 微合金化及换向轧制对Cu合金晶粒尺寸热稳定性的影响. 中国有色金属学报, 2022

[54] 断续时效对7B52叠层铝合金组织和力学性能的影响. 中国有色金属学报, 2022

[55] T9I6热处理对2519A铝合金厚板厚向组织与性能的影响. 中国有色金属学报, 2021

[56] 加载方向对7B52叠层铝合金动态冲击力学性能及微观组织的影响. 塑性工程学报, 2021

[57] 激光粉末沉积AlSi10Mg合金的致密化机制. 中国有色金属学报, 2021

[58] 长期热暴露对Al-Cu-Mg合金微尺寸变化的影响. 中国有色金属学报, 2021

[59] 激光粉末沉积轻质Ti/Al密度梯度材料的裂纹形成机理及自愈合行为. 中国有色金属学报, 2021

[60] 基于高温扭转方法制备6061铝合金/304不锈钢层状复合材料的组织及性能. 材料导报, 2021

[61] 残余应力和第二相对Al-Cu-Mg合金微尺寸变化的影响. 中国有色金属学报, 2019

[62] 化学改性发泡剂对泡沫铝材料性能的影响. 东北大学学报(自然科学版), 2018

[63] 不同Mn含量的铝青铜合金组织与性能. 稀有金属, 2017

代表专利

[64] 一种高性能海螺壳仿生结构铝基复合装甲及其成形方法. 专利号：ZL202310242795.6

[65] 一种高致密化镍基合金表面耐高温腐蚀涂层的一体化制备方法. 专利号：ZL202510071760.X

[66] 一种时效强化铝合金低温热处理方法. 专利号：ZL202410471911.6

[67] 一种获得优异高温拉伸性能钛基复合材料的制备工艺. 专利号：ZL202310828230.6

[68] 一种GT35钢结硬质合金的热处理方法. 专利号：ZL201711354239.9

[69] 一种SiCp/Cu-铜箔叠层复合材料及其制备方法. 专利号：ZL201710625124.2

[70] 一种超细WC粉体的分散方法. 专利号：ZL201410680394.X

[71] 一种低密度铌基复合材料及制备方法. 专利号：ZL201711352916.3

[72] 一种高强弹性黄铜及其制备方法. 专利号：ZL201310305885.1

[73] 一种钼合金MoSi2-ZrO2-Y2O3涂层及其制备方法和应用. 专利号：ZL201610420178.0

[74] 一种纳米WC-Co复合粉末的制备方法. 专利号：ZL201310411270.7

[75] 一种铌基复合材料及制备方法. 专利号：ZL201611115516.6

[76] 一种泡沫铝三明治结构材料的制备方法. 专利号：ZL201310195324.0

[77] 一种强化相呈网状分布的TiAl基复合材料及其制备方法. 专利号：ZL202010839164.9

[78] 一种提高GT35钢结硬质合金尺寸稳定性的方法. 专利号：ZL201711354239.9

[79] 一种提高航空航天用铝合金尺寸稳定性的方法. 专利号：ZL201610246514.4

[80] 一种悬臂式铝合金分流挤压模具. 专利号：ZL201711354239.9

[81] 一种硬质合金用亚微米晶陶瓷涂层及制备方法. 专利号：ZL201410788784.9

[82] 铝合金板材热成形-在线淬火复合的成形装置. 专利号：ZL202020143468.7

[83] 铝合金板材热成形-在线淬火复合的成形装置与成形方法. 专利号：ZL202010074317.5

[84] 一种“界面互锁/筋加强”叠层装甲铝合金及其制备方法. 专利号：ZL202110347598.1

[85] 一种层状复合材料界面结合强度测试装置. 专利号：ZL202120257278.2

[86] 一种高温扭转制备多层金属复合材料的方法. 专利号：ZL201911187417.2

[87] 一种铝合金构件慢速热成形-淬火复合的成形方法. 专利号：ZL202010076071.5

[88] 一种适用于大型装备的钛合金焊接双面保护装置. 专利号：ZL202011498918.5

[89] 一种双向挤压制备包覆结构金属复合材料的装置及方法. 专利号：ZL202011493510.9

[90] 一种钛锆铌合金的加工方法. 专利号：ZL201910432865.8

[91] 一种碳化硅复合提高铝铜镁合金稳定性的方法. 专利号：ZL201811478124.5

[92] 一种悬臂式铝合金分流挤压模具. 专利号：ZL201910428684.8

[93] 一种轧制复合调控提高铝合金稳定性的方法. 专利号：ZL202211306872.1